DJI Mavic 2 Smart Controller 3D Printed Harness Mount
This is a simple harness adapter utilizing the two M4 threaded holes on the bottom face of the DJI Smart Controller for the Mavic 2
Thingiverse Link Design by OCELOT27
This is a simple harness adapter utilizing the two M4 threaded holes on the bottom face of the DJI Smart Controller for the Mavic 2 (likely intended for a harness/etc in the first place which apparently DJI hasn't released as of this publishing). You will need two M4 machine screws at least 6mm in length but not longer than 12mm. One design is counter sunk for flat head screws and the other for button head.
The hole for the USB-C connector fits the one supplied with the controller which seems to be pretty chunky so it should work with just about any USB-C cable. There are also cut-outs for the speakers