See why everyone is crazy about this now RTF plane, the revised Dolphin from AtomRC, with INAV6 and DJI o3 on it. Link: http://bit.ly/3JI8pFA
Thanks AtomRC for supplying this unit here for the review!
Massive thanks to TJ for helping me with the external shots (don't miss that part starting at 10:22!!!!) check out his channel: @dynashot1
I create HONEST reviews! If you can support this please check my PATREON: https://bit.ly/2ESMtIO
Build was quick and easy!
- servos, linkages, motor, ESC, FC and GPS were already installed
- Wings and vtail needed to be glued on
- prepared DJI O3 cable (long with plug for FC was supplied, other end open cables)
- connect CRSF RX (on UART 2!)
- printed a custom O3 lensmount for the little cutout just behind the nose
- make sure o3 has enough cooling! Don't use rocksteady as this makes o3 hotter?
- created a little air scoop to help the airflow https://www.thingiverse.com/thing:5908342
- installed a heatsink on the O3 (25x25mm)
- Tip/correction: bending the cable like I did with the CRSF antenna is not recommended!
Weight: 520gr with dji o3
Motor: 2306 1700kv
ESC: 30A with 5V/3A BEC seems to be strong enough to supply DJI O3
Servo: 2pcs 9g servo
Propeller recommend: 6~7 inch, incl. 70x40 (cw and ccw)
Batteries: 4s 1500-2200mah LIPO or 4sLiIon 3000 or 4000mah good cells (30-40amps)
CG on the "nobs" works fine, maybe use a slight bit forward
SOFTWARE - INAV 6: "horizon hawk"
it had INAV 5.1 preinstalled, with basic settings
if INAV configurator (use the correct version!) doesn't connect, use the ImpulseRC Driver fixer. It's still a valid tool - and GOLDEN!
INAV 6.RC3 (as of 11.3.2023)
FC has barometer!
all SETTINGS are here: http://bit.ly/3Fpu8zu
ESC: ATOMRC BLS 30A (input: 2~4S Lipo)
Continuous current: 30A / Max Current: 35A
Output: Built in 5V 3A BEC
ESC doesnt need calibration if you use DSHot 600
Set motor brake with BLHeliS config! (or reverse motor direction if you want to use other prop)
F405 Flightcontrol: https://atomrc.com/collections/fc/products/atomrc-fixed-wing-flight-controller-f405-navi
3d printed Things:
my modified, simple DJI O3 cammount and airscoop: https://www.thingiverse.com/thing:5908342
ESC cooling lid: https://www.thingiverse.com/thing:5147951
Another air scoop: https://www.thingiverse.com/thing:4852275
many Dolphin parts: https://www.thingiverse.com/thing:5233106/files
div. nose parts: https://www.thingiverse.com/thing:5365305
air unit nose mount: https://www.thingiverse.com/thing:5158022
Nose for Insta360 Go 2 https://www.thingiverse.com/thing:4928240
simple Cammount: https://www.thingiverse.com/thing:5207967/files
CULTS 3d: https://cults3d.com/en/3d-model/game/atomrc-dolphin-parts-dji-cable-management-pan-tilt
DO YOU WANT TO SEE MORE???
►TOP Videos: http://goo.gl/MHfr1D
►Mountain DIVES: http://goo.gl/FfXPHa
►Product REVIEWS: http://goo.gl/mZkwHr
my Hangar: http://goo.gl/QNzck
Filmed with: Sony A7c, Samsung Galaxy S10, edited with Premiere Pro
air2air shots supplied by my friend Thorsten, check out his channel or book him for pro work: @dynashot1
Exits - Felix Johansson Carne
I use EPIDEMIC SOUND, get your account here (affiliate): https://bit.ly/3p6OGE0
║╚╣║║║╚╣╚╣╔╣╔╣║╚╣═╣ → http://goo.gl/szFJv
╠╗║╚╝║║╠╗║╚╣║║║║║═╣ (best way to support me!)
► Discord Server: https://discord.gg/9fPs8cpxBS
02:20 additional stuff, cables...
04:40 OSD with O3
05:23 some upgraded parts, tweaks
10:22 external CHASE shots
#RCSchim #AtomRC #Dolphin